Do-It-Yourself Kitchen Projects – Installing a New Sink

Kitchen sinks come in three basic varieties (even though there are a host of distinct sizes and shapes). The surface-mount sink, the sort employed most regularly by residence renovators, has a lip that goes over the top of the counter.

The flush-mount sink butts up against the countertop edge so that it is even with the counter. A special tightening clip holds the sink in place. Finally, there is the under-the-counter sink. It is held in place by clips screwed into the bottom of the counter.

When you don’t want to redo the entire counter, install the sur¬face-mount variety. If you do a careful job of removing the old sink, with out damaging the counter, you may be able to location the new sink appropriate on the existing lip with no further work to the countertop surface. Otherwise, strategy on performing the countertop at the identical time as the sink.

If you’re performing a minor renovation, you may be able to save time and funds by refinishing the old sink. This involves putting a new surface on it and is best accomplished by a professional. The advantage is that you don’t want to remove the sink and tear out the countertop. The dis¬advantage is that you still end up with the old sink.

What Does a Sink Price?
You can get a frequent kitchen sink in metal or in porcelain over steel. Stone and far more exotic supplies are also available. The cheap¬er varieties price as small as . From there the cost goes up. I have seen a kitchen sink selling for over 00.

Prevent the least expensive sinks, particularly the porcelain-over-metal selection. Usually the porcelain is thin and may chip or wear away easily. Also, remain away from the low-end stainless steel sinks. They quickly show water stains. If you’re going to the trouble of replacing a sink, get a good 1. Anticipate to pay around for 1 that’s not fancy and is in white.

How Do I Install the Sink?
There isn’t a entire lot of skill involved in installing a sink. If it’s a flush-mount, you have to make positive it fits the cutout (hole). If it’s an over-the-lip model, you have to be sure you have enough lip to hold the sink.

Usually install the faucets before putting the sink in. It is significantly easier than crawling underneath later on and try¬ing to install them.

A sink that’s flush with the countertop or underneath it attaches by indicates of tiny screws placed every single four to 6 inches. A lip sink sim¬ply sits on the countertop. Its weight plus some silicone caulk at the edges hold it in location.

Sinks are heavy, often much more than 100 pounds. Get assist when lifting 1 into place. Acquiring a hernia or smashing a countertop is not a way to save funds by performing it your self.

The biggest issue most men and women have with sink installations is that they never appear to have all the parts at hand. They’re often going back to the hardware store for a piece of tubing or some extra drain pipe.

If you plan ahead and cover all contingencies by purchasing additional parts (particularly for the drain), you’ll save yourself a lot of time and headache. The extras can be returned later.

There need to be no exceptional difficulties when installing a sink. Just remember that the sink is heavy and you will need to be careful not to drop it onto the counter.